Elegant vanity tops, from single sinks to double vanities. We craft custom solutions that combine beauty with water-resistant durability.
Bathroom vanity tops, Denver
A vanity top is small, and that is exactly why it shows every decision.
There is nowhere to hide a bad seam, an off-center sink or a backsplash that stops short. We fabricate and install bathroom countertops in Denver for single vanities, double vanities and the odd-size powder room top.
Bathrooms are also harder on stone than most people expect. Water sits around the faucet. Toothpaste, makeup and hair products spill and dry. Plenty of bathroom cleaners are acidic. The right material and finish for a primary bath can be the wrong one for a kids' bath, and we will tell you which is which.
Most bathroom work comes down to a few shapes. The size of the top changes how we plan the slab, the sinks and the splashes.
A single vanity top is usually one piece of stone with one sink cutout and faucet drilling. Because the piece is small, a premium material that would strain a kitchen budget can be perfectly reasonable here. Powder rooms are a good place to take a risk on color or pattern.
Double vanities commonly run 60 to 72 inches or longer, with two sinks. Many fit on a single slab without a seam. We check the sink centers against the cabinet, the mirrors, the lighting and the plumbing in the wall, so both sinks sit where they should and neither person gets the cramped side.
Most vanity tops get a matching backsplash, plus a side splash wherever the top meets a wall. Splashes keep water off the drywall and cover the small gaps that out-of-square walls leave behind. A taller stone backsplash, or stone run up to the mirror, is an option if you want the wall to read as one surface.
A vanity is a smaller job than a kitchen, but it gets the same sequence. Estimates and in-home measurements are free, and you get a personalized quote within 24 hours of your request.
The fixtures drive the fabrication. Change a faucet after the holes are drilled and you are buying new stone.
Undermount sinks give you a clean edge to wipe into and need a cutout with a finished, polished interior edge. Vessel sinks sit on top and need only a drain hole, but they raise the rim, so check the total height against the vanity. Drop-in sinks are the most forgiving on cutout size.
Single-hole, 4-inch centerset and 8-inch widespread faucets each need different drilling. Wall-mount faucets need no holes in the top at all, but the valve and supply lines have to be in the wall before we measure. Choose fixtures before templating.
Vanity tops are commonly fabricated from 2 cm or 3 cm material. An eased or small bevel edge suits most bathrooms. In a tight room where hips meet the counter, a softer, rounder edge is worth considering.
Quartz is the low-effort choice for most bathrooms. It needs no sealing and resists the stains that come from makeup and hair dye. Granite works well once sealed. Quartzite gives you natural stone with good hardness, but keep it sealed and check how it handles water pooling around the faucet.
Marble is the traditional vanity stone, and in a primary bath used by adults it can be a fine choice. Acidic cleaners and some toiletries etch it, and honed marble hides that better than polished. In a kids' bath we would usually steer you elsewhere. Soapstone is a quieter option: dense, matte and immune to etching, though it scratches.
If Kids share the bathroom
Then Choose quartz. It shrugs off toothpaste, makeup and neglect better than natural stone does.
If You want marble in a primary bath
Then Choose honed marble, keep it sealed and clean it with a pH-neutral product.
If You picked a vessel sink
Then Check the rim height against the vanity height before we measure.
If You want a double vanity with no seam
Then Ask us to confirm the slab length covers the full top before you commit.
Bathroom installs usually move faster than kitchens because there are fewer pieces. Clear the vanity, empty the drawers if the top needs to come off, and leave a path to the room. The crew sets the top, levels it, attaches any undermount sinks and sets the splashes.
Ask during your estimate who handles disconnecting and reconnecting the faucet and drain for your project. Once the top is in, give sink adhesive and caulk the time the crew recommends before you run water heavily.
| Material | Water and stains | Toiletries and cleaners | Upkeep | Best fit |
|---|---|---|---|---|
| Quartz | Non-porous, very resistant | Avoid harsh solvents and high-alkaline cleaners | No sealing | Shared and kids' baths |
| Granite | Resistant when sealed | Use a pH-neutral cleaner | Reseal periodically | Most bathrooms |
| Quartzite | Varies by slab. Keep it sealed | Use a pH-neutral cleaner | Seal and watch the faucet area | Natural stone with hardness |
| Marble | Absorbs if left unsealed | Etches with acids and some cleaners | Seal, wipe drips, accept patina | Adult primary baths and powder rooms |
| Soapstone | Dense, low absorption | Does not etch | Optional mineral oil. Scratches sand out | A quiet, matte look |
Price depends on the vanity size, the material and slab, the number of sinks and faucet holes, the edge profile and how much backsplash you want. A single vanity in quartz and a long double vanity in marble land in very different places. Start with a free estimate and in-home measurement and we send a personalized quote within 24 hours.
Both hold up well. Quartz needs no sealing and resists makeup and hair dye stains, which makes it the easier choice in a shared or kids' bath. Granite is natural stone with more variation, and it needs periodic sealing.
Yes, and it has a long history there. Expect etching from acidic cleaners and some toiletries. A honed finish, a good sealer and a pH-neutral cleaner keep it looking right in an adult bath.
Double vanities commonly run 60 to 72 inches wide, with longer custom runs, and cabinet depth is often around 21 inches. Your top is cut to your actual cabinet and the overhang you choose, so we measure in your home.
Yes. Sink cutouts and faucet holes are cut to your specific fixtures. Have them on site or send us the spec sheets before the measurement appointment.
Usually, if the cabinet is level, solid and the size you want. We check its condition at the in-home measurement. A cabinet with water damage or a sag is worth replacing first, since stone will not flex to hide the problem.
Recommended surfaces
